Sony XM-GTR3301D mono amp

Category:

Description

Print Friendly, PDF & Email

330w/600w RMS (4 ohm/2 ohm) mono amp for subwoofers.

A more efficient way to amplify your music

The GT3301D has been rated a Class D amplifier, converting 90% of incoming power into speaker output – around 30% more than most conventional amplifiers. As a result, the amplifier is able to deliver incredible power without generating large amounts of heat.

Dynamic Distortion Suppressor™

Distortion can occur when an amp is driven too hard, with your audio’s signal peaks being abruptly clipped. The GT3301D’s Dynamic Distortion Suppressor™ reduces signal peaks without clipping them harshly, substantially reducing the levels of distortion.

Active Thermal Control

High temperatures can have a negative effect on amplifier components, often causing the amp to shut down until it returns to a cooler temperature. Active Thermal Control automatically manages the amp’s output, so you won’t need to worry about your music cutting out – even with prolonged use.

Flexible mounting options

The amp’s single-sided connections provide flexible installation and multiple mounting options.

High-Level Input

No pre-amp outputs? No problem. If your speaker system doesn’t have pre-amp outputs, simply connect your receiver’s outputs to the amp’s high-level inputs and you’re ready to go. Thanks to built-in auto-sensing technology, the amp will automatically engage whenever the head unit is switched on.

Low Pass Filter

The single-channel GTR3301D is designed for maximum performance with subwoofers. The variable low pass filter (50-300Hz) lets you tune the amp for deep bass and the perfect integration with the rest of your system.

 

Get it now at
Rapid Radio

Book an install
09-3031838
Kenwood Car Audio from Rapid Radio

Specifications

Print Friendly, PDF & Email
DIMENSIONS (W X H X D)
35.7 x 5.5 x 27.7
WEIGHT
2.9
CHANNEL CONFIGURATION
1ch (Mono)
LOW PASS FILTER
50-300Hz
SLOPE : LOW PASS FILTER
12dB/oct
MAX. CHANNEL CONFIGURATION AT 4 OHM (W) / THD (%)
330W x 1 / 1.0% (20-200Hz)
MAX. CHANNEL CONFIGURATION AT 2 OHM (W) / THD (%)
600W x 1 / 1.0% (50Hz)
MAX. CHANNEL POWER CONFIGURATION AT 4 OHM
600W x 1
MAX. CHANNEL POWER CONFIGURATION AT 2 OHM
1100W x 1
FREQUENCY RESPONSE
10-300Hz
TOLERANCE
+0.5/-3dB
SIGNAL TO NOISE RATIO
100dB
TOTAL HARMONIC DISTORTION AT 1 KHZ (%)
0.1% (50Hz)
CEA POWER OUTPUT
330W x 1
CEA SN RATIO
65dBA
BALANCED INPUT CIRCUIT
YES
LOAD CAPABILITY (OHM)
– / YES
LINE OUT
YES (Through)
MOSFET POWER SUPPLY
YES / YES
SUBSONIC HIGH PASS FILTER 
6-70Hz (Variable),12dB/oct
BASS BOOST: FREQUENCY (0 – 10 DB)
40Hz
SPEAKER LEVEL INPUT
YES
LINE IN: INPUT SENSITIVITY
0.3-6
GOLD PLATED CONNECTORS
YES
CURRENT DRAIN (A) – RATED OUTPUT POWER AT 4 OHM
30A

Reviews

There are no reviews yet.

Be the first to review “Sony XM-GTR3301D mono amp”

Your email address will not be published. Required fields are marked *